Submissions from 1998
Study of Transition Metal Oxide Doped LaGaO3 as Electrode Materials for LSGM- Based Solid Oxide Fuel Cells, Fanglin Chen and Meilin Liu
Thermal Decomposition of BaC2O4·0.5H2O Studied by Stepwise Isothermal Anaylsis and Non-Isothermal Thermogravimetry, Fanglin Chen, O. T. Sorensen, G. Meng, and D. Peng
Plane Stress Crack Tip Field Around a Rapidly Growing Ductile/Rigid Interface Crack, Xiaomin Deng
Details of the Integral Equation Method Applied to the Analysis of an Adhesive Layer Crack, Victor Giurgiutiu, Axinte Ionita, and David A. Dillard
Synthesis and Electrical Properties of Dense Ce0.9Gd0.1O1.95 Ceramics, Kevin Huang, Man Feng, and John B. Goodenough
Wet Chemical Synthesis of Sr- and Mg-Doped LaGaO3, a Perovskite-Type Oxide-Ion Conductor, Kevin Huang and John B. Goodenough
Sr‐ and Ni‐Doped LaCoO3 and LaFeO3 Perovskites: New Cathode Materials for Solid‐Oxide Fuel Cells, Kevin Huang, Hee Y. Lee, and John B. Goodenough
Superior Perovskite Oxide-Ion Conductor; Strontium- and Magnesium-Doped LaGaO3: III, Performance Tests of Single Ceramic Fuel Cells, Kevin Huang, Robin Tichy, John B. Goodenough, and Christopher Milliken
Superior Perovskite Oxide-ion Conductor Sr- and Mg- doped LaGaO3: Part II Ac Impedance Spectroscopy, Kevin Huang, Robin S. Tichy, and John B. Goodenough
Superior Perovskite Oxide-Ion Conductor; Strontium- and Magnesium-Doped LaGaO3: I, Phase Relationships and Electrical Properties, Kevin Huang, Robin S. Tichy, and John B. Goodenough
Correlation of Grain-Boundary Precipitates Parameters with Fracture Toughness in an Al-Cu-Mg-Ag Alloy Subjected to Long-Term Thermal Exposure, B. Q. Li and Anthony P. Reynolds
Experimental Characterization of Crack Tip Deformation Fields in Alloy 718 at High Temperatures, Jin Liu, Michael A. Sutton, and Anthony P. Reynolds
Measurement of Fracture Toughness of Ultra-Thin Amorphous Carbon Films, Xiaodong Li and Bharat Bhushan
Micromechanical and Tribological Characterization of Hard Amorphous Carbon Coatings as Thin as 5 nm for Magnetic Recording Heads, Xiaodong Li and Bharat Bhushan
Kinetics and Mechanism of a Sintering Process for Macroporous Alumina Ceramics by Extrusion, Huan-ting Wang, Xing-qin Liu, Fanglin Chen, Guang-yao Meng, and O. Roft Sorensen
Submissions from 1997
Tribological Studies of Chromium Oxide Films for Magnetic Recording Applications, Bharat Bhushan, Gerard S.A.M. Theunissen, and Xiaodong Li
Micromechanical and Tribological Characterization of Doped Single-Crystal Silicon and Polysilicon Films for Microelectromechanical Systems Devices, harat Bhushan and Xiaodong Li
Synthesis of Nd-Doped Barium Cerate Proton Conductor from Oxalate Coprecipitate Precursor, Fanglin Chen, O. T. Sorensen, G. Y. Meng, and D. K. Peng
Chemical Stability Study of BaCe0.9Nd0.1O3−α High Temperature Proton-Conducting Ceramic, Fanglin Chen, O. Toft Sorensen, Guangyao Meng, and Dingkum Peng
Preparation of Nd-Doped Barium Cerate through Different Routes, Fanglin Chen, O. Toft Sorensen, Guangyao Meng, and Dingkun Peng
Preparation of Nd-doped BaCeO3 Proton-Conducting Ceramics by Homogeneous Oxalate Coprecipitation, Fanglin Chen, Ping Wang, O. Toft Sorensen, Guangyao Meng, and Dingkum Peng
Large-Amplitude Rotary Induced-Strain (LARIS) Actuator, Victor Giurgiutiu and Craig A. Rogers
Power and Energy Characteristics of Solid-State Induced-Strain Actuators for Static and Dynamic Applications, Victor Giurgiutiu and Craig A. Rogers
Static and Dynamic Testing of Large-Amplitude Rotary Induced-Strain (LARIS Mk 2) Actuator, Victor Giurgiutiu and Craig A. Rogers
Electrode Performance Test on Single Ceramic Fuel Cells Using as Electrolyte Sr‐ and Mg‐Doped LaGaO3, Kevin Huang, Man Feng, John B. Goodenough, and Christopher Milliken
Micrormechanical Characterization of Magnetic Tapes, Xiaodong Li and B. Bhushan
Fracture Mechanisms of Thin Amorphous Carbon Films in Nanoindentation, Xiaodong Li, Dongfeng Diao, and Bharat Bhushan
Isotropic and Kinematic Hardening in a Dispersion-Strengthened Aluminum Alloy, Jed S. Lyons and Anthony P. Reynolds
Effect of Aluminide Particle Distribution on the High Temperature Crack Growth Characteristics of a Co-Ni-Fe Superalloy, Jed S. Lyons, Anthony P. Reynolds, and James D. Clawson
Prediction of Crack Growth Direction for Mode I/II Loading using Small-Scale Yielding and Void Initiation/Growth Concepts, Michael A. Sutton, W. Zhao, M. L. Boone, Anthony P. Reynolds, and D. S. Dawicke
Submissions from 1996
Fuel Cells with Doped Lanthanum Gallate Electrolyte, Man Feng, John B. Goodenough, Kevin Huang, and Christopher Milliken
Passive and Active Tagging of Reinforced Composite Samples for In-Process and In-Field Non-Destructive Evaluation, Victor Giurgiutiu, Zao Chen, Frederic Lalande, Craig A. Rogers, Robert Quattrone, and Justin Berman
Dynamic Power and Energy Capabilities of Commercially-Available Induced-Strain Actuators, Victor Giurgiutiu and Craig A. Rogers
Energy-Based Comparison of Solid-State Induced-Strain Actuators, Victor Giurgiutiu, Craig A. Rogers, and Zaffir Chaudhry
Solid-State Actuation of Rotor Blade Servo-Flap for Active Vibration Control, Victor Giurgiutiu, Craig A. Rogers, and Razvan Rusovici
Bi2O3-Y2O3-CeO2 Solid Solution Oxide-Ion Electrolyte, Kevin Huang, Man Feng, and John B. Goodenough
Sol-Gel Synthesis of a New Oxide-Ion Conductor Sr- and Mg-Doped LaGaO3 Perovskite, Kevin Huang, Man Feng, and John B. Goodenough
Characterization of Sr‐Doped LaMnO3 and LaCoO3 as Cathode Materials for a Doped LaGaO3 Ceramic Fuel Cell, Kevin Huang, Man Feng, John B. Goodenough, and Michael Schmerling
Microstructure and Deposition Rate of Aluminum Thin Films from Chemical Vapor Deposition with Dimethylethylamine alane, Byoung-Youp Kim, Xiaodong Li, and Shi-Woo Rhee
Determination of Temperature Field Around a Rapidly Moving Crack Tip in an Elastic-Plastic Solid, Wen Li, Xiaomin Deng, and Ares J. Rosakis
Nanoscale Mechanical Characterization of Glass Fibers, Xiaodong Li, Bharat Bhushan, and Peter McGinnis
Mössbauer Study of the 430°C Decomposition of 18Ni(350) Maraging Steel, Xiaodong Li, Zhongda Yin, and Haibin Li
Mössbauer Study of the Composition Fluctuation during Spinodal Decomposition in a 3.5 GPa Fe-10%Ni-14%Mo-19%Co (wt.%) Maraging Steel, Xiaodong Li, Zhongda Yin, You Wang, and Mingzhe Zheng
Characterization of the Si/SiO2 Interface Formed by Remote Plasma Enhanced Chemical Vapor Deposition from SiH4/N2O with or without Chlorine Addition, Young-Bae Park, Xiaodong Li, and Shi-Woo Rhee
Comparison of R-Curve Methodologies for Ranking the Toughness of Aluminum Alloys, Anthony P. Reynolds
The Effect of Elevated Temperature Exposure on Fracture Resistance and Fracture Path in a Precipitation Strengthened Aluminum Alloy, Anthony P. Reynolds and Qiong Li
Determination of Elastic-Plastic Stresses and Strains from Measured Surface Strain Data, Michael A. Sutton, Xiaomin Deng, J. Liu, and L. Yang
Finite Element Modeling of Creep Fracture Initiation in a Superalloy Material, Lei Yang, Michael A. Sutton, Xiaomin Deng, and Jed S. Lyons
Submissions from 1995
Mechanics of Debonding and Delamination in Composites: Asymptotic Studies, Xiaomin Deng
Plane Strain Near-Tip Fields for Elastic-Plastic Interface Cracks, Xiaomin Deng
Engineering Feasibility of Induced Strain Actuators for Rotor Blade Active Vibration Control, Victor Giurgiutiu, Zaffir Chaudhry, and Craig A. Rogers
Heat Conduction and Seebeck Effect in Oxygen Cell, Kevin Huang, Yuhua Xia, and Qingguo Liu
Structural Characterization of Aluminum Films Deposited on Sputtered-Titanium Nitride/ Silicon Substrate by Metalorganic Chemical Vapor Deposition from Dimethylethylamine alane, Xiaodong Li, Byoung-Youp Kim, and Shi-Woo Rhee
Structural Characterization of Silicon Films Deposited at Low Temperature by Remote Plasma Enhanced Chemical Vapor Deposition, Xiaodong Li, Young-Bae Park, Dong-Hwan Kim, and Shi-Woo Rhee
A Computer-Simulated Electron Diffraction Analysis of Precipitates in 18Ni(350) Maraging Steel, Xiaodong Li and Zhongda Yin
Mössbauer Study of the Aging Behavior of 18Ni(250) Maraging Steel, Xiaodong Li and Zhongda Yin
Reverted Austenite during Aging in 18Ni(350) Maraging Steel, Xiaodong Li and Zhongda Yin
The Relationship between the Product of Load and Sliding Speed with Friction Temperature and Sliding Wear of a 52100 Steel, You Wang, Xiaodong Li, and ZhenCheng Feng
Submissions from 1994
The Asymptotic Structure of Transient Elastodynamic Fields at the Tip of a Stationary Crack, Xiaomin Deng
Development of Strength Theories for Random Fiber Composites, Victor Giurgiutiu
Rapid Determination of Electronic Conductivity in MgO-Partially Stabilized ZrO2 Electrolytes using EMF Method, Kevin Huang, Yuhua Xia, and Qingguo Liu
Investigations on Commercially Available MgOPSZ Electrolytes with Y2O3 FSZ Coating for Low Oxygen Determination in Liquid Steel, Kevin Huang, Yuhua Xia, Weijiang Wu, Qingguo Liu, and Wen Liu
Effect of Tempering Temperature on Microstructure and Sliding Wear Property of Laser Quenched 4Cr13 Steel, J.H. Ouyang, Y.T. Pei, Xiaodong Li, and T.C. Lei
Several Considerations Regarding the Variable Length Blade Rotor, Bogdan Popescu and Victor Giurgiutiu
Retained Mechanical Properties of a new Al-Li-Cu-Mg-Ag Alloy as a Function of Thermal Exposure Time and Temperature, Anthony P. Reynolds and D. M. Royster
Frictional Temperature Field and Wear Behavior of Steel 52100 With Different Microstructures, You Wang, Mufu Yan, Xiaodong Li, and Tingqun Lei
Explicit Expressions of Transient Elastodynamic Crack Tip Fields for Mixed-Mode Crack Propagation, Lei Yang, Xiaomin Deng, and Yuh J. Chao
Submissions from 1993
Dynamic Crack Growth Along Elastic-Plastic Interfaces, Xiaomin Deng
On Stationary and Moving Interface Cracks with Frictionless Contact in Anisotropic Bimaterials, Xiaomin Deng
Propagating Interface Cracks with Frictionless Contact, Xiaomin Deng
Transient, Asymptotic, Elastodynamic Analysis: A Simple Method and its Application to Mixed-Mode Crack Growth, Xiaomin Deng
The Diffusivity and Solubility of Oxygen in Reference Electrodes Ni-NiO, Co-CoO, Fe-FeO and Mo-MoO2 Systems, Kevin Huang, Shaohua Tang, and Qingguo Liu
Mössbauer Study of the Early Stages of Aging in 18Ni(350) Maraging Steel, Xiaodong Li, Z.D. Yin, H.B. Li, and T.C. Lei
A New Look at Energy Release Rates for Quasi-Statically Propagating Cracks in Inelastic Materials, Ralf Peek and Xiaomin Deng
Elevated Temperature Fatigue of P/M Aluminum Alloy 8009, Anthony P. Reynolds
Mössbauer Study of the Early Stages of Aging in An Fe-19Co-14Mo-10Ni Maraging Steel, Z. D. Yin, Xiaodong Li, M. Z. Zheng, M. L. Liu, X. W. Liu, and M. Z. Jin
Submissions from 1992
Mechanisms of Fatigue Crack Retardation Following Single, G. H. Bray, Anthony P. Reynolds, and E. A. Starke
Complete Complex Series Expansions of Near-Tip Fields for Steadily Growing Interface Cracks in Dissimilar Isotropic Materials, Xiaomin Deng
A Finite Element Investigation of Quasi-Static and Dynamic Asymptotic Crack Tip Fields in Hardening Elastic-Plastic Solids Under Plane Stress; Part I: Crack Growth in Linear Hardening Materials, Xiaomin Deng and Ares J. Rosakis
A Finite Element Investigation of Quasi-Static and Dynamic Asymptotic Crack Tip Fields in Hardening Elastic-Plastic Solids Under Plane Stress; Part II: Crack Growth in Power-Law Hardening Materials, Xiaomin Deng and Ares J. Rosakis
Activity of Bi2O3 in Bi2O3 Y2O3 Oxygen Ion Conductor, Kevin Huang, Changzhen Wang, and Xiuguang Xu
A New Electrochemical Sensor for Rapid Determination of Silicon Content in Carbon Saturate Iron, Kevin Huang, Weijiang Wu, and Qingguo Liu
Constant Amplitude and Post-Overload Fatigue Crack Growth Behavior in PM Aluminum Alloy AA 8009, Anthony P. Reynolds
Submissions from 1991
Dynamic Crack Propagation in Elastic-Perfectly Plastic Solids Under Plane Stress Conditions, Xiaomin Deng and Ares J. Rosakis
A Study on Dry Friction of Eutectoid Steel, Xiaodong Li, You Wang, and Jiajun Liu
Elevated Temperature Cracking of RSP Aluminum Alloy 8009: Characterization of the Environmental Influence, William C. Poor Jr., Anthony P. Reynolds, Yang Leng, and Richard P. Gangloff
Cleavage Crystallography of Liquid Metal Embrittled Aluminum Alloys, Anthony P. Reynolds and G. E. Stoner
Submissions from 1990
Negative Plastic Flow and its Prevention in Elasto-Plastic Finite Element Computation, Xiaomin Deng and Ares J. Rosakis
Standard Gibbs Free Energy of Formation of ZrOS, Whi-Tong Sui, Xing-Yi Xiao, Kevin Huang, and Chang-Zhen Wang
A Small Angle X-Ray Scattering Study of the Early Stages of Decomposition in 10Ni Maraging Steel, Z. D. Yin, Xiaodong Li, and M. Z. Zheng
Submissions from 1989
Effect of Pre-Aging Strain on Mercury Embrittlement of 2024 Aluminum Alloy, Anthony P. Reynolds and G. E. Stoner