Tensile Properties of Friction Stir Welded and Friction Stir Welded-Superplastically Formed Ti-6Al-4V Butt Joints, M. Ramulu, P. D. Edwards, D. G. Sanders, Anthony P. Reynolds, T. Trapp
Faculty Publications

Effects of Thermal Boundary Condition in Friction Stir Welded AA7050-T7 Sheets, P. Upadhyay, Anthony P. Reynolds
Faculty Publications

Effect of Initial Base Metal Temper on Mechanical Properties in AA7050 Friction Stir Welds, J. Yan, Anthony P. Reynolds
Faculty Publications

Residual Stress Effects on Fatigue Crack Growth in a Ti-6Al-4V Friction Stir Weld, S. Pasta, Anthony P. Reynolds
Faculty Publications

Limited Weld Residual Stress Measurements in Fatigue Crack Propagation: Part I. Complete Field Representation through Least-Squares Finite-Element Smoothing, Y. Z. Ge, Michael A. Sutton, Xiaomin Deng, Anthony P. Reynolds
Faculty Publications

Limited Weld Residual Stress Measurements in Fatigue Crack Propagation: Part II. FEM-Based Fatigue Crack Propagation with Complete Residual Stress Fields, Michael A. Sutton, Anthony P. Reynolds, Y. Z. Ge, Xiaomin Deng
Faculty Publications

Combined Simulation and Experiment for Friction Stir Welding Process Development, Anthony P. Reynolds
Faculty Publications

Process-Structure-Property Relationships for Nugget and Heat Affected Zone Regions of AA2524-T351 Friction Stir Welds, Junhui Yan, Michael A. Sutton, Anthony P. Reynolds
Faculty Publications

Relationships Between Weld Parameters, Hardness Distribution and Temperature History in Alloy 7050 Friction Stir Welds, Anthony P. Reynolds, W. Tang, Z. Khandkar, Jamil A. Khan, K. Lindner
Faculty Publications

Friction Stir Welding of DH36 Steel, Anthony P. Reynolds, W. Tang, M. Posada, J. Deloach
Faculty Publications

Two-Dimensional Friction Stir Welding Process Model Based on Fluid Mechanics, T. U. Seidel, Anthony P. Reynolds
Faculty Publications

Utility of Relatively Simple Models for Understanding Process Parameter Effect on FSW, Anthony P. Reynolds, Z. Khandkar, T. Long, Wei Xiao Tang, Jamil A. Khan
Faculty Publications

R-curve Behavior of Friction Stir Welds in Aluminium-Lithium Alloy 2195, H. R. Kroninger, Anthony P. Reynolds
Faculty Publications

Measurement of the Effect of Artificial Crack Geometry on the Rate of Bulk H⁺ Transport using Fiber Optic Chemical Sensors, P. D. Peterson, Anthony P. Reynolds, Michael A. Sutton
Faculty Publications

Finite Element Simulation of Material Flow in Friction Stir Welding, S. Xu, Xiaomin Deng, Anthony P. Reynolds, T. U. Seidel
Faculty Publications

Visualization of Material Flow in Autogenous Friction Stir Welds, Anthony P. Reynolds
Faculty Publications

Experimental Investigation of E/M Impedance Health Monitoring for Spot-Welded Structural Joints, Victor Giurgiutiu, Anthony P. Reynolds, Craig A. Rogers
Faculty Publications

Use and Verification of Digital Image Correlation for Automated 3-D Surface Characterization in the Scanning Electron Microscope, W. D. Lockwood, Anthony P. Reynolds
Faculty Publications

Effect of Aluminide Particle Distribution on the High Temperature Crack Growth Characteristics of a Co-Ni-Fe Superalloy, Jed S. Lyons, Anthony P. Reynolds, James D. Clawson
Faculty Publications

Elevated Temperature Fatigue of P/M Aluminum Alloy 8009, Anthony P. Reynolds
Faculty Publications

Mechanisms of Fatigue Crack Retardation Following Single, G. H. Bray, Anthony P. Reynolds, E. A. Starke
Faculty Publications

Constant Amplitude and Post-Overload Fatigue Crack Growth Behavior in PM Aluminum Alloy AA 8009, Anthony P. Reynolds
Faculty Publications

Effect of Pre-Aging Strain on Mercury Embrittlement of 2024 Aluminum Alloy, Anthony P. Reynolds, G. E. Stoner
Faculty Publications